3M Aura 9205+ - Health Care Particulate Respirator N95 7100232219
3M Aura™ Particulate Respirator 9205+, N95 – High Performance Flat-Fold Respirator
≥ 95 % Filtration Efficiency
The 3M Aura™ 9205+ is an ultra-lightweight, flat-fold N95 respirator delivering ≥ 95 % filtration of non-oil particulates at 85 L/min. Patented three-panel design collapses to 5 mm for compact storage then springs open to seal diverse facial contours. Sculpted nose and embossed top panels boost eyewear clearance and channel exhaled air away from lenses to reduce fogging. Available in cases of 440 units or boxes of 20 units to suit both bulk procurement and smaller stock needs.
- Three-panel flat-fold
Collapses to 5 mm then springs open for a snug seal - Sculpted nose panel
Adds 12 mm eyewear clearance with smooth inner liner - Embossed top panel
Deflects exhalation upward—reducing fog by up to 65 % - Innovative chin tab
+15 % faster donning, 20 % fewer fit errors in trials - Soft polyurethane foam
Conforms to nasal pressure points for 8+ hours of comfort - Dual braided headbands
Non-latex polyisoprene, staple-attached for consistent tension - Adjustable aluminum clip
Molds to any bridge shape—locks for leak-free seal - Advanced electrostatic media
Multi-layer polypropylene captures ≥ 95 % of 0.3 μm particles at ≤ 343 Pa inhalation
- Part Number
- 9205+
- 3M ID / SAP ID
- 7100232219
- Legacy SKU
- 70071734837
- Local Catalog ID
- 9205+
- Packaging Configurations
- Cases of 440 or boxes of 20
- Unit Weight
- ≈ 9.92 g
- Folded Dimensions
- ≈ 123 × 95 mm
- Shelf Life
- 5 years (–20 °C to +50 °C; ≤ 80 % RH)
- Inhalation Resistance
- ≤ 343 Pa @ 85 L/min
- Exhalation Resistance
- ≤ 245 Pa @ 85 L/min
- Outer/inner layers: spunbond polypropylene
- Core filter: electrostatically charged meltblown polypropylene
- Headbands: braided polyisoprene (non-latex)
- Nose foam: polyurethane
- Clip/staples: aluminum/steel
• NIOSH 42 CFR 84 certified: < 5 % penetration at 0.3 μm, 85 L/min
• Maintains ≥ 95 % efficiency through 200 mg salt aerosol loading
• Proprietary media balances low breathing resistance with high capture
- Clean hands. Cup respirator under chin, nose clip up.
- Pull headbands over head—upper band at crown, lower at neck.
- Mold nose clip evenly around nose bridge with both hands.
- Perform:
Positive seal check: Exhale sharply, feel for leaks.
Negative seal check: Inhale sharply, mask should collapse.
- NIOSH-approved N95 (TC-84A-7526)
- OSHA 1910.134 compliant (training, fit test, medical eval)
- CSA Z94.4 selection/use/care (Canada)
- EN 149:2001+A1:2009 FFP2 equivalent when tested locally
- REACH & RoHS compliant; latex-free
• Dispose as contaminated PPE per local regulations.
• Some regions: 3M recycling program for polypropylene components.
• No flame-retardant or chemical finishes; minimal environmental impact.
WARNING: Reduces exposure to certain airborne particulates. Read all instructions carefully.
U.S.: OSHA 1910.134 program required (training, fit test, medical eval).
Canada: CSA Z94.4 program required. Misuse may cause serious harm or death.
Tech Support: U.S. 1-800-247-3941, Canada 1-800-267-4414
More from 3M
Recently viewed