3M Scotch-Weld DP125-1.64OZ-CLR - Epoxy Adhesive DP125 Duo-Pak in Clear - 1.69 fl. Oz (50 ml) 7100320463
Two-Part Structural Epoxy | Scotch-Weld DP125
3M™ Scotch-Weld™ Epoxy Adhesive DP125, Translucent, 48.5 mL Duo-Pak
A low-odor, two-part epoxy structural adhesive designed to create strong and flexible bonds on metal, ceramics, glass, wood, stone and many plastics. Its 25-minute work life provides time to position and adjust components before the adhesive reaches handling strength.
Mix ratio
1:1
Two-part epoxy system
Work life
25 minutes
Time to position and adjust
Handling strength
Approx. 150 min
Under stated test conditions
Package
48.5 mL
1.6 fl oz translucent Duo-Pak
Why choose DP125?
- Strong and flexible: creates structural bonds while helping accommodate expansion, contraction and limited movement.
- Low odor: suitable for industrial bonding work where a lower-odor formulation is preferred.
- Longer positioning time: provides up to 25 minutes of work life for adjustment and repositioning.
- Controlled dispensing: medium viscosity flows smoothly and helps minimize dripping, running and migration.
- Translucent finish: creates a less visually prominent bond than opaque gray or black adhesives.
Designed for demanding bonding
3M™ Scotch-Weld™ DP125 is intended for structural bonding and general attachment applications where both mechanical strength and flexibility are important.
Structural bonding General attachment Joining Mounting Potting Encapsulating Trim attachment Small joint assembly
Bonding dissimilar materials
DP125 is especially useful when joining materials with different coefficients of thermal expansion. Its flexible epoxy bond can help maintain adhesion as bonded materials expand, contract or experience limited movement.
Recommended substrates
Metal
General industrial and assembly bonding
Ceramics
Structural joining and attachment
Glass
Useful for dissimilar material bonding
Wood and stone
Attachment and assembly applications
Plastics
Many rigid and semi-rigid plastics
Common industry applications
01
Appliance assembly
Useful for general attachment and structural bonding where substrates may experience vibration or thermal movement.
02
General industrial
Designed for industrial joining, mounting, bonding and small joint assembly applications.
03
Transportation
Flexible structural bonding can help accommodate limited movement, vibration and differences between joined materials.
04
Signs and design materials
Suitable for general attachment and bonding work involving metal, plastic, glass, wood and other materials.
Duo-Pak dispensing system
This 48.5 mL package is a 3M Duo-Pak cartridge containing the two adhesive components in a 1:1 ratio. Use a compatible 3M dispensing system recommended for DP-size structural adhesives to meter and mix the components accurately.
Proper dispensing helps maintain the specified mix ratio and supports consistent bond performance from the beginning to the end of the cartridge.
Application guidance
01
Prepare the surfaces
Surfaces should be clean, dry, sound and free from oil, dust, loose material and other contamination.
02
Dispense and mix
Use compatible Duo-Pak dispensing equipment and a suitable mixing system to maintain the 1:1 ratio.
03
Position the parts
Apply sufficient adhesive for the joint and use the approximately 25-minute work life to align and reposition the components.
04
Allow the bond to cure
The adhesive reaches handling strength in approximately 150 minutes and is fully cured in approximately 7 days under stated room-temperature conditions.
Safety information
Read the product label and Safety Data Sheet before use. The SDS identifies skin and eye irritation hazards and the possibility of an allergic skin reaction for the adhesive components.
Avoid breathing vapours or fumes. Use only outdoors or in a well-ventilated area. Wear suitable protective gloves and eye protection, wash exposed skin after handling, and follow all applicable workplace safety requirements.
For industrial and occupational use only. Not for consumer sale or use.
Technical specifications and ordering information
| Product | 3M™ Scotch-Weld™ Epoxy Adhesive DP125 |
|---|---|
| Product color | Translucent |
| Package size | 1.6 fl oz (48.5 mL) |
| Package format | Duo-Pak cartridge |
| Adhesive type | Epoxy |
| Adhesive system | Two-part structural adhesive |
| Mix ratio | 1:1 by volume |
| Physical form | Liquid |
| Viscosity | Medium viscosity |
| Work life | Approximately 25 minutes |
| Handling strength | Approximately 150 minutes |
| Full cure time | Approximately 7 days at room temperature |
| Recommended substrates | Metal, ceramics, glass, wood, stone and many plastics |
| Recommended applications | Bonding, joining, gluing, structural bonding, mounting, potting and encapsulating |
| Certification | UL 94 HB Certified |
| Order unit | Each |
| Manufacturer case quantity | 12 each |
| Brand | Scotch-Weld™ |
| 3M Catalogue Number | DP125 |
| 3M ID / Stock Number | 7100320463 |
| Legacy SKU | 62329114375 |
| UPC, each | 00068060756633 |
| Country of origin | United States |
Frequently asked questions
What is 3M Scotch-Weld DP125 used for?
DP125 is used for structural bonding, joining, general attachment, mounting, potting and encapsulating applications involving metal, ceramics, glass, wood, stone and many plastics.
What color is 3M DP125?
This version is listed as translucent by 3M. The product page URL may use a CLR abbreviation, but the manufacturer product data identifies the adhesive color as translucent.
What is the mix ratio for DP125?
The two components are designed to be mixed at a 1:1 ratio by volume through a compatible Duo-Pak dispensing system.
How long does DP125 take to cure?
DP125 provides approximately 25 minutes of work life, reaches handling strength in approximately 150 minutes and is fully cured in approximately 7 days under stated room-temperature conditions.
Is DP125 sold individually?
Yes. The catalog identifies one 48.5 mL Duo-Pak as the consumer saleable unit. The manufacturer case quantity is 12 units.
Does DP125 require a special applicator?
For accurate metering and mixing, use a compatible 3M dispensing system recommended for DP-size Duo-Pak structural adhesives.
More from 3M
Recently viewed